Denair Air Compressor Ail Water Separator | Shanghai Denair Compressor Co., Ltd.

Goods Category

Oil water Separator

Attribute
[Inlet pressure]	0.4～1.0Mpa
[Inlet temperature]	5℃～65℃
[Initial pressure drop]	≤0.005Mpa
[Filter route]	5μm
[Water removal]	rate ≥99%
[Outlet air oil content]	≤10ppm

Quantity：

Detail Description

Product introduction:
Oil water separator is a new product developed by HOLYSUN, who absorbs & assimilates foreign advanced technology and construction. It's internal is made of steel net foam and the housing is made of steel too. 1.0Mpa pressure in general. DA series compressed air oil/water separator adopts direct head off, inertial hit and Brown diffusion and condenser. It can remove dust, water and oil efficiently from the compressed air. And also can remove high capacity of water & oil can be used widely.

Model	Capacity	Air connection	Draining connection	Dimension(mm)			Weight
Model	Capacity	Air connection	Draining connection	A	B	H	Kg
DA-001	1.2	ZG1"	ZG1/2"	245	133	530	24
DA-003	3.8	ZG1"	ZG1/2"	245	133	530	27
DA-006	6.5	ZG1 1/2"	ZG1/2"	245	133	571	48
DA-010	10.7	ZG2"	ZG1/2"	335	219	1035	71
DA-015	15	DN80	ZG1/2"	365	245	1139	75
DA-020	20	DN80	ZG1/2"	390	273	1139	90
DA-030	30	DN80	ZG1/2"	440	325	1180	106
DA-040	40	DN100	ZG1/2"	500	377	1230	136
DA-060	60	DN125	ZG1/2"	565	426	1250	150
DA-080	80	DN125	ZG1/2"	670	516	1270	182
DA-100	100	DN150	ZG1/2"	780	616	1550	221
DA-150	150	DN200	ZG1/2"	870	716	1830	235
DA-200	200	DN200	ZG1/2"	970	716	1850	260
DA-250	250	DN250	ZG1/2"	910	740	1900	305
DA-300	300	DN250	ZG1/2"	910	740	2210	340