Normal Inlet Temperature Air cooling Refrigerated Air Dryer

Goods Category

Air Dryer: Normal Inlet Temperature Air-cooling; High Inlet Temperature Air-cooling; Normal Inlet Temperature Water-...; High Inlet Temperature Water-...; Heatless Purge Desiccant Air Dryer; Externally Heated Purge Desiccant ...
Air Filter: Air Filter; Oil Water Separator
Air tank: Air Tank

Normal Inlet Temperature Air-cooling Refrigerated Air Dryer

Attribute
[Inlet temperature]	Normal temperature≤45^oC High temperature ≤80^oC
[Cooling Method]	Air Cooling
[Ambient temperature]	≤38^oC
[Pressure dew point]	1.7^oC
[Refrigerant]	R-22
[Inlet pressure]	0.6-1.0Mpa
[Pressure loss]	≤0.02MPa

Quantity：

Detail Description

Flow chart:

1、Heat exchanger
2、Evaporator
3、Gas/Liquid separator
4、Jam-prevent drain filter
5、Manual draining valve
6、Refrigerated compressor
7、Aspirating filter
8、Vaporization
9、Separator
10、Gas/Liquid mixer
11、Thermal expansion valve
12、View monitor
13、Dry filter
14、Tank
15、Hot gas by-pass valve
16、Water adjustable valve
17、Water filter
18、Condenser(Air-cooling)
19、Condenser(Water-cooling)
20、Pre-cooler(Water-cooling)
21、Pre-cooler(Air-cooling)
22、Auto-drainer

1. Perfect refrigerated system configuration. Initial parts come from foreign famous brands to ensure efficient & system reliable running & life as well.
2. Refrigerated & air system is accurate calculated by professional designing engineer, keep 20% capacity.
3. Gas liquid separated thoroughly. Filtering separated with HANKISON element. Thorough separation, avoid the second vapor of water, ensuring dry effect. It better than cyclone separated and it will reach efficiency at 99.99%.
4. Pipeline is made from inner zincification. You can choose working pressure during 0.3~4.5Mpa.
5. Stainless steel pipeline, it's suitable for medicine, food stuff, acid-resistant, alkaline-resistant and erodent-resistant industry.
6. Ripple pipeline of both internal and external of the heat exchanger to increase the using rate of cooling air, adverse current structure, perfect returning temperature and it won't freeze.
7. Evaporator is made from laminose copper pipeline with aluminum flake, high efficiency of heat exchanging of the perfect structure.
8. Good drainage, it adopts 3 grades for draining, can drain lots of condensate water and oil contaminant so as to keep clean and dryness of the system and air, meanwhile reduce system load.
9. Multi-control of circuitry to supply to different users (single control; integrate circuit, linkage control, PC panel, frequency conversion, etc.)
10. Outer cooling fan with large volume, low noise, and long life if switch frequently.
11. Low condenser made from copper, slow flow, multi-cycling and high heat exchanging rate. It won't freezing and dirty if stop for a long time.
12. Armstrong foam burning resistant & adiabatic material. It's the least loss of cooling air.
13. Protection level of compressor is IP54 (dustproof and spill proof).

Model		DA -15NF	DA -20NF	DA -25NF	DA -30NF	DA -40NF	DA -50NF
Capacity	Nm3/min	17	23	27	33	45	55
Voltage	V/Hz	380/50
Compressor power	HP	3.6	5	5	7.5	10.5	10.5
Fan power	W	160×2	160×2	160×2	180×4	180×4	3×245
Connection		DN65	DN80	DN80	DN100	DN125	DN125
Net weight	KG	330	400	450	780	820	900
Dimension (mm)	L	1230	1400	1500	1650	1950	2100
	W	650	830	930	930	1050	1250
	H	1180	1235	1450	1580	1600	1830

FriendLink: compressor air compressor screw compressor 德耐尔空压机

Address:8 F, Dajiang Commercial Building, No.166 North Guyang Road, Shanghai, China. SalesDepartment:0086 21 37831829,0086 21 37831827,0086 21 37831923
Fax:0086 21 37831812Postcode:201600 Services Mail:sinodenair@gmail.com,denaircompressor@gmail.com,denairchina@gmail.com